Outdoor performance textile test notes and labeled specimens

Fabric Procurement Checklist: 7 Steps Before You Specify a Single Yard

A cost controller's practical checklist for evaluating decorative fabrics—from fiber selection (yes, including viscose) to brand tiering (Kravet, Kravet Couture) and hidden cost traps. Built from six years of tracking $180K+ in annual textile spend.

By Dalia Nasser

Who This Checklist Is For (and What It Won't Cover)

If you're specifying upholstery, drapery, or contract textiles and you've ever gotten burned by a "great quote" that ballooned 30% by delivery, this is for you. I'm a procurement manager at a 45-person interior design firm. I've managed our fabric budget ($180,000 annually) for six years, negotiated with 40+ vendors, and logged every order in our cost tracking system. This checklist is the exact sequence I run before signing off on any fabric purchase over $2,000.

Seven steps. About 45 minutes of focused work per fabric family. It won't make you a textile engineer—but it will stop you from paying couture prices for commodity goods (or vice versa).

One thing upfront: if you're brand-new to fabric specification and feeling shaky on fiber basics, consider a short course. I've sent two junior team members to local textile classes (search "textile classes near me" in your metro—community colleges and trade schools offer solid evening programs). A textile engineering degree is overkill for buyers, but a 6-week intro course pays for itself the first time it stops you from specifying a rayon blend for a hotel lobby.

Step 1: Identify the Fiber—and Get Honest About Viscose

Before you look at a single swatch from any brand, including Kravet, pin down the fiber content. This is the non-negotiable first check.

Here's the question I get most from newer designers on our team: Is viscose a good fabric? The honest answer: it depends entirely on application. Viscose (often labeled rayon in the US) has excellent drape and takes dye beautifully—which is why you see it in Kravet Couture and similar high-end drapery lines. But it's a weak fiber when wet, prone to shrinking, and it pills in high-abrasion seating. For a decorative pillow or a low-traffic drapery panel? Fine. For a family-room sofa or a contract chair? I'd push back hard.

"Saved $12/yard by specifying a viscose-blend on a commercial seating project. Ended up spending $2,400 refinishing the frames after the fabric wore through in 14 months. Net loss: roughly $1,800."

Checkpoint: If the spec sheet lists viscose or rayon above 30% in any high-abrasion application, request a Martindale or Wyzenbeek abrasion report before proceeding. Don't take "performance" as a marketing term—get the number.

Step 2: Match the Brand Tier to the Project Tier

This is the step most buyers skip, and it's where I see the biggest budget leaks. Brands organize themselves in tiers for a reason—specifying outside the tier usually means either overpaying or underdelivering.

Take Kravet as an example. The Kravet name is the parent brand—solid, wide range, professional-grade. Kravet Couture fabric is their elevated line: higher-end fibers, more complex weaves, typically 40-60% higher per-yard cost. If you're specifying Kravet Couture on a mid-market residential job, you're likely misallocating budget. If you're specifying the base Kravet line on a luxury penthouse, the client may notice.

Checkpoint: Write the project's price-per-yard ceiling on your spec sheet before opening any brand's catalog. I use a simple rule: no more than 15% of the budget on any single decorative fabric family, and never more than one "couture" tier fabric per room unless the client explicitly approves it.

I have mixed feelings about this tiering system. On one hand, it feels like gatekeeping. On the other, it's saved me from some truly awkward client conversations about why the sofa cost more than the car.

Step 3: Calculate Total Cost of Ownership (Not Unit Price)

Unit price is a decoy. Here's what I actually track in my TCO spreadsheet—every fabric gets a row, every column gets filled before purchase approval:

  • Base fabric cost (per yard, with the current tariff/duty if imported)
  • Freight (Kravet ships from multiple warehouses; ask which one before you assume ground rates)
  • Cut fee / minimum order (some lines have 2-yard minimums; overage goes in the trash)
  • Backing / finishing (performance treatments, stain guards—often quoted separately)
  • Lead time buffer (if it's 6 weeks, what does a 2-week delay cost your project schedule?)
  • Waste factor (pattern repeat above 14" means 15-20% waste on drapery—budget for it)

In Q2 2024, I compared three vendors for a 220-yard contract order. Vendor A quoted $38/yard. Vendor B quoted $34/yard. I almost went with B until I ran TCO: B charged $4/yard for a required performance backing, $180 for a cut fee, and shipped from a single warehouse with a 9-week lead. Vendor A's $38 included backing, no cut fee, and 5-week lead from a regional hub. Total difference: $1,100 in hidden costs, plus four weeks of schedule risk. I went with A.

Checkpoint: If a quote doesn't break out freight, finishing, and minimums, ask for a line-item breakdown in writing. Vendors who won't provide one usually have something to hide in the math.

Step 4: Request Physical Samples and Test Them

This sounds obvious. It's also the step where people get lazy. Digital swatches lie. Monitor calibration lies. Even the brand's own photos lie under different lighting.

My routine: request a 6"×6" minimum sample (not a 2" chip), then run three tests:

  1. Light test: view it under daylight, incandescent, and LED. Kravet fabrics can shift noticeably between these—especially the deep blues and burgundies.
  2. Rub test: fold it over a firm edge and rub 20 times with your thumb. If surface fibers start lifting, that's a pilling warning.
  3. Seam test: fold it over itself and press. Delicate weaves (looking at you, some viscose blends) will show permanent crease marks.

Back in 2022, I skipped the rub test on a "performance" blend that turned out to be a viscose-heavy weave with a light topical finish. It passed spec on paper. By month eight, the high-traffic chairs in that office looked terrible. Reupholstery cost $3,800—more than double what we'd saved by choosing that fabric over the $6/yard upgrade.

Checkpoint: Log the sample receipt date and batch/Lot number. If the production run differs from the sample (it happens more than vendors admit), the lot number is your only recourse.

Step 5: Verify Stock, Lead Time, and Reorder Availability

Here's the step almost everyone skips: ask about future availability, not just current stock.

Fabric lines get discontinued. Dye lots shift between runs. I've been burned twice by specifying a fabric that was "in stock" at the time, only to need 40 more yards six months later and find the entire colorway discontinued. One of those times we had to reupholster an entire seating group because the 12-yard replacement we needed didn't exist anywhere.

Checkpoint: Before finalizing any order over 100 yards, ask the rep two questions in writing: (1) Is this SKU at risk of discontinuation in the next 18 months? (2) Can I get a dye-lot reservation for future reorders? Get it in an email. Not because you'll sue—because it forces them to check.

Same principle applies to contract textiles through Kravet's commercial division. Contract clients have long memories and longer warranty periods. A fabric that can't be reordered is a liability with a beautiful face.

Step 6: Read the Contract for the Three Clauses That Cost Real Money

I'm not a lawyer. But after six years of managing this budget, I can tell you the three contract clauses that have cost us real money:

  • Restocking fees: typically 20-25% if you return unused yardage. Some vendors waive it if you reorder within 30 days. Ask.
  • Claims window: damage and defect claims often have a 10-14 day window from delivery. If your receiving dock is slow to inspect, you lose the claim. We implemented a same-day inspection policy after eating $900 in damaged goods.
  • Price escalation clause: some contracts allow the vendor to pass through tariff or raw-material increases up to 10% without renegotiation. On a $30,000 order, that's $3,000 you didn't budget.

Checkpoint: Before signing, highlight those three clauses in your contract review. If any of them are missing or vague, email the rep and ask for the exact terms. A vendor who can't answer clearly in writing is telling you something.

Step 7: Build the Vendor Scorecard (One File, Every Order)

This is the step that feels like extra work and pays off for years. After every order, I log four data points in a single spreadsheet: promised lead time vs. actual, defect rate (complaints per 100 yards), invoice accuracy (did the final bill match the quote?), and responsiveness (hours to reply to a question).

After 18 months of tracking, I could rank every vendor we use on cost reliability alone. Two vendors we'd used for years turned out to run a 22% invoice-variance average—meaning we were paying 22% more than quoted on a routine basis without noticing. We didn't fire them. We started requiring line-item confirmation on every invoice before approval. Problem solved.

Checkpoint: If you don't have a vendor scorecard yet, start one today with your next order. Even three columns (lead time, defect rate, invoice variance) will change how you buy within six months.

Common Mistakes (I've Made Most of These)

  • Specifying by brand name alone. "Kravet" isn't a fabric—it's a company with dozens of sub-lines at wildly different price and performance points. Always specify the exact SKU and fiber content.
  • Ignoring pattern repeat on the quote. A 24" repeat means you're buying 20-25% more yardage than the room's square footage suggests. That's not markup—that's math. Budget for it.
  • Treating "performance fabric" as a binary. A viscose-poly blend with a topical stain finish is not the same as a solution-dyed acrylic. Read the abrasion numbers, not the marketing label.
  • Forgetting that education is part of your job. If you don't understand why a fabric costs what it costs, you can't negotiate it and you can't explain it to a client. A 6-week textile course (or even a few hours on fiber science) is the cheapest procurement tool you'll ever buy.

Bottom line: a fabric's unit price is the least interesting number on the page. Run the checklist, do the TCO math, and keep your vendor scorecard current. The rest is just swatches.

Dalia Nasser
Dalia Nasser

Dalia Nasser is a textile fibre and yarn analyst specializing in cotton, wool, polyester, nylon, viscose, lyocell, elastane, recycled filaments, staple fibres, technical yarns, and sewing threads. She applies ISO 2061 twist measurement and the ISO 1833 series for blend analysis while comparing tex or denier, tenacity, elongation, evenness, twist direction, moisture regain, filament count, dye uptake, contamination, and lot consistency. Her sourcing notes help spinners, weavers, knitters, and product teams translate fibre declarations and yarn specifications into stable processing and fabric performance.